Polyurethane and Water based finish maintenance

1.     Vacuum

Vacuum, dry mop or sweep to remove any loose dirt or grit. The best method of removing dirt and grit is vacuuming with a soft brush attachment on your vacuum. If using the Bona Microfiber mop to dry mop, remove any loose dirt or grit after dry-mopping by rinsing with water and wringing out the mop pad prior to cleaning floor with Bona Hardwood Floor Cleaner.

 

2.     Spray

Lightly mist a 4’x6’ area of your floor or directly mist the cleaning pad with Bona Hardwood Floor Cleaner.


3.     Clean

Using a slightly dampened, well wrung-out Bona Microfiber cleaning pad, thoroughly clean the floor surface using your Bona Microfiber mop. Finish one area before moving on to the next. When your mop pad becomes soiled, rinse with water, thoroughly wiring out the pad and continue cleaning with Bona Hardwood Floor Cleaner. When the mop pad becomes excessively soiled, launder and replace with another clean mop pad. Continued use of excessively soiled pads may cause streaking.


After doing these steps, if you do not feel like you can no longer achieve the cleanliness that you desire for your wood floors. Contact Sullivan Hardwood Flooring and we can schedule you with our Deep Cleaning service and restore the luster back to your floors that you once had. This can be achieved as long as you maintenance your wood floors regularly and use the recommended products given to you by our staff. If you happen to run out of your Bona cleaning solution contact Sullivan Hardwood Flooring and we will be happy to provide you with the correct cleaning solution for your wood flooring needs.